Possible custom Project for someone....

Can you guess who?

 

 

Leopard Wood anyone?

 Some new design bowls. Again some gorgeous leopard wood. Cannot wait until I get these done.

Bowls

These are made from some very special rarer woods. Wenge is the darker bowls, an Padauk is the redder colored one, resting on Zebra Wood. These still need to be finished completely but  I haven't posted in a while.

Revised

This one cuts machine time in half. This is right off machine un-sanded or finished in any way, but the ones shipped will be. however, I will offer these up for $38.00 with brass corners or $33.00 without. It will still have hanging device.

 

Hang on your front door, office door, crapper door, anywhere you think you want people to know whats up with the person behind the door.... and what they might expect.

 

Colors, sure what ever you want. Material, again you tell me and I will make it happen.

 

I will make the III ones at the lighter depth too and see how their times shake out. I will offer both though to anyone that wants the deeper ones too.

Also the helmet is Cherry wood where the III is Black Walnut. But both can be made from anything you like.

 

billsbilletboxes@gmail.com

To get them to you. Drop me a note please.

 

Thanks for looking guys.

3D Hand carved look Helmet

In an effort to make these a bit more cost effective perhaps even in half, I have lightened up the depth of the relief by about 50% in hopes to reduce cycle time by half. I may get 25% here. I also increased step over of small .125 ball endmill some from .008 per pass to .011 per pass. this should yield pretty good results we will know in about 30 minutes. look for new design.

3D "Hand Carved" Look III Wall Plaques

Material Walnut or Cherry (or anything you want really). Dimensions are 3 1/4 x 5 inches. 3/4 inch thick. This particular piece is a repurposed walnut from over 80 years ago.

 

 

These Plaques are fully 3D machined with and 1/8th inch ball end mill and take over an hour to machine the relief alone.  Cost $75.00

This example is finished natural. Brass corners and wall mount included. without Brass corners cost $70.00. it will just have sharp square corners.

 

drop a note to billsbilletboxes@gmail.com if you are interested and I can get them out to you right away. Also they can be personalized if so desired. get with me for any details.

 

Thank you -Bill

Looking good

Right off the Machine.

 

 

Do you know?

How hard is is to find wood with perfectly placed III's in them? It's amazing what you can find in trees.... ;)

I am going to be making Custom drawer fronts...

I am going to be making drawer fronts with either the Greek helmet or with the III centered in the drawer. inlayed or engraved.

If this is something that interests you, drop me a note at billsbilletboxes@gmail.com 

I can machine yours if they are natural wood so they will match what you have, or I can machine mine for you.

let me know what your thoughts are please.

Just so you can see so far. I am machining inlays at the moment but will cut real part in a few minutes.

 

And yes depths will be mapped to the surface curvature.

 

Someone said they wanted a claymore wall plaque?

Ok here is the prototype. Inlays not cut in yet and no engraving which means a blank piece of paper.

I thought "point towards tyranny" with the I I I inlaid flush with curved surface.

If this interests You or have ideas  of what to engrave please email to billsbilletboxes@gmail.com
I have to figure out what this thing will cost me to make.

I can make some cool things and will make to order if I can.

-Bill

Fly Fishing Lure Boxes

 

 

 

Lined with Foam on one side to stab your hooks into, felt on the other. Engraved with the III on one side and a Trout or perhaps something else of your choice on the other.

Designed to fit in Shirt Breast pocket, hinged, and with magnet closure.

If you are interested please drop me a note at billsbilletboxes@gmail.com and I can get one together for you.

Thank you -Bill

 

Test New Post

Lets call this one "Honoring the 2nd"

 



I will be making these from Cherry inlaid with Walnut or Purple Heart woods, and from Maple with the same inlays. I have 3 available now but will be making a limited number depending demand. They will all be numbered, have hanging hooks and felt pads with no less than 10 coats of a water based polyurethane. Dimensions are 10"x 6"x 3/4". if you are interested please drop me a note at billsbilletboxes@gmail.com and I will get one ready for you.

well I hope my first test post actually works...... -Wish me well -Bill.